Overview
An all-surface decorative spray paint that will renovate everything from garden furniture to kitchen cupboards. Its comfort grip contains a unique mechanism that delivers an advanced spray system that can dispense at any angle, including upside down. It's chip and fade-resistant and will adhere to even the most demanding surfaces including plastic, metal, brick, and concrete.
- Fade & chip resistant
- Rust preventative
- Adheres to difficult surfaces
- Easy to use, spray application
| Area | Interior & exterior |
| Recommended Use | Wood, plastic, metal, brick and concrete. |
| Coverage | Approx. 2m² per Aerosol |
| Drying Time | Touch dry in 30 minutes, hard dry in 24 hours |
| Re-Coat Time | Within 1 hour or after 24 hours |
| Recommended Coats | 2-3 coats |
| Application Method | Areosol Spray |
Preparation
Ensure the surface to be painted is clean and free from dust and possible contaminants.
- On previously painted surfaces remove any loose or flaking material and sand the surface to provide a key.
- Remove any rust with an appropriate rust remover.
- Thoroughly clean to ensure the removal of grease and dirt
- Remove any oil or wax from the surface by sanding or using a suitable stripper
Application
Ensure to perform a test on a small area of the surface to be painted to ensure you are happy with the finished results. Apply only when the temperature is between 10-32°C.
- Shake the can vigorously for 1 minute after the mixing ball begins to rattle and continue to shake regularly during use.
- Hold approx 30cm from the surface and spray in a continuous back-and-forth motion.
- Slightly overlap each stroke.
- Apply several light coats a few minutes apart or recoat within 1 hour or after 24 hours.
Always follow the manufacturer's instructions found on the can
